CoatPrep Ceramic Coating Surface Cleaner | Pro Degreaser & Prep Spray

CoatPrep

Ceramic Coating Surface Cleaner

CoatPrep_-_Ceramic_Coating_Surface_Cleaner_Car_Dynamics_3 - Car Dynamics

CoatPrep_-_Ceramic_Coating_Surface_Cleaner - Car Dynamics

Thumbnail of CoatPrep_-_Ceramic_Coating_Surface_Cleaner_Car_Dynamics - Car Dynamics

Car Dynamics

CoatPrep - Ceramic Coating Surface Cleaner

€12,95 EUR

Sale Sold out

Taxes included. Shipping calculated at checkout.

Size 500ml

Quantity

View full details

CoatPrep_Ceramic_coating_surface_cleaner1_b14063e7-77bf-4472-a76f-f1623ff9c3af - Car Dynamics

CoatPrep Overview

CoatPrep is a water-based degreaser specially formulated for ceramic coating application. It ensures vehicle surfaces are clean and ready prior to coating. CoatPrep is designed to effectively break down and remove all forms of grime, oil and residue ensuring a pristine surface for coating.

CoatPrep penetrates deep into the surface, lifting and dissolving tough contaminants like grease, road film and oils which are commonly missed by regular cleaners.

Safe to use on all vehicle surfaces, including paint, metal, plastic and rubber, CoatPrep is ideal for all vehicles that need an ultra-clean surface prior to coating.

By using CoatPrep as part of your preparation, you maximise the bonding and durability of your graphene and ceramic coatings.

How To Use

Ensure the vehicle surface has been thoroughly washed and cleaned. Typically where required this would include a Pre-Wash with either NeutralXTFR or CitraCleanse, followed by ProAlpine or ProSno snow foam. The vehicle should also have been shampooed with either HydroLux or PearlLux shampoo. Use the ClayGlider clay bar with InstaDetail to finally remove any bonded contaminants the washing process can’t remove. For heavily contaminated surfaces or used surfaces a full polish/detail may also be required to get the paint finish to an acceptable standard prior to coating.
Once clean, the vehicle surface needs to be de-contaminated using the CoatPrep solution. This ensures any remaining residues from waxes, silicones and other contamination are removed.
Start by spraying CoatPrep solution to an area of 2 metres squared at a time. Begin wiping the solution across the surface with a microfibre cloth such as UltraBuff 300 to decontaminate and remove any waxes/silicones.

Use a dry microfibre cloth to remove any excess fluid, creating a clean, contaminant-free and dry surface. Repeat the process across the other areas of the vehicle. Where applicable, replace the microfibre with a clean one as soon as it becomes dirty.