Car Dynamics
CeramiXPPF is the ultimate 3-Year ceramic coating boost for your vehicle's vinyl wrap, matte paint and paint protection film. Designed specifically for these surfaces, CeramiXPPF is an advanced solution that provides exceptional protection.
CeramiXPPF utilises cutting-edge ceramic technology that incorporates enhanced hydrophobic and oleophobic properties. This advanced formula forms a strong, durable layer that provides extreme resistance to water, dirt and other contaminants. This consequently shields your vehicle’s surface against damage from UV rays, acid rain, salts, bird lime, oil and exhaust fumes.
As well as providing this unparalleled protection, CeramiXPPF is also designed to maintain your vehicle's immaculate condition for up to three years, making it a smart investment for lasting vehicle care.
Unlike traditional coatings, CeramiXPPF excels in maintaining the unique look and texture of your vehicle's wrap, PPF or matte paint. The result is a rich finish that highlights your vehicle's beauty and simplifies the maintenance of keeping your vehicle in pristine condition.
Designed for easy application, CeramiXPPF is the ideal solution for the weekend DIYer as well as the seasoned professional detailer.
With its long-lasting properties, CeramiXPPF enables you to enjoy the benefits of a well protected finish for years to come without the headache of frequent reapplications.
1 × 50ml CeramiXPPF3-Year ceramic coating boost for your wrap / matte vehicle providing exceptional paint protection.
1 × 100ml CoatPrepDecontaminate solution that ensures any remaining residues are removed.
2 × CeramiXPad Ceramic Coat ApplicatorsEach applicator features a hydrophobic barrier beneath the microfibre surface to prevent product absorption—ideal for even efficient application of ceramic coatings.
3 × UltraBuff 300 (40x40cm Microfibre Cloths 300gsm)Ultra-soft lint-free cloths for buffing and residue removal without scratching.
1 × CeramiXPPF Instruction ManualComprehensive step-by-step guide to ensure correct application and optimal results from start to finish.
1 × Pair of Nitrile GlovesProtects your hands during the coating process.
1 × 1ml Precision Pipette DropperAllows for controlled and accurate dispensing of coating solution.
The application procedure is conducted in a well-ventilated area and the provided nitrile gloves are always used when applying the coating.
For effective adhesion and longevity, surface preparation prior to coating is paramount. Without correct and proper preparation the coating will have a short-lived final finish.
CeramiXPPF works by cross-linking to the surface that it’s applied to, hence surface cleaning is an essential part of the process to avoid contamination between the coating and the surface to be protected.
CeramiXPPF must be applied in a clean, dry environment with no rain forecast for a minimum 4-hour period if application is outside. If strong winds are present, coating should not take place due to the coating flashing off too quickly.
Application should not occur in direct sunlight or during the hotter parts of the day. The coatings should be applied in an ambient temperature above 5°C and no higher than 35°C. This temperature range also applies to the surface temperature of the substrate. Additionally the temperature must stay within these parameters for a minimum of 12 hours after application.
Ensure the vehicle surface has been thoroughly washed and cleaned. Typically where required this would include a Pre-Wash with either PowerXTFR / NeutralXTFR or CitraCleanse, followed by ProSno or ProAlpine snow foam. The vehicle should also have been shampooed with either HydroLux or PearlLux shampoo. Use the ClayGlider clay bar with InstaDetail to finally remove any bonded contaminants the washing process can’t remove. For heavily contaminated surfaces or used surfaces a full polish/detail may also be required to get the paint finish to an acceptable standard prior to coating.
Once clean, the vehicle surface needs to be de-contaminated using the CoatPrep solution provided in the kit. This ensures any remaining residues from waxes, silicones and other contamination are removed.
Begin with one area and coat one area of 1–2 square metres at a time, ensuring that each panel is gently worked horizontally, then vertically, for an even spread of the coating. This method is known as cross-hatching as shown in the photo.
The area should look wet and have a rainbow appearance after approximately 1–3 minutes.
After the initial buff you may see a slight haze / smear effect under an inspection light. Grab a second microfibre cloth and very gently wipe along the surface again. Ensure the buffing process is light and only excess residue is being removed.
Continue this until a uniform streak free appearance is achieved and you have the perfect finish.
Once the buffing process is complete, repeat the aforementioned steps by first selecting a new area of the surface to be coated. It is important to note that after the first application you may only need 3–5 drops as the ceramic coating applicator becomes saturated.
To make the process more efficient, having multiple people is ideal. This way as one person applies the coating using the cross-hatching method, the other person can follow shortly after in synchronisation with the buffing and levelling.
Please note in some cases if the product has been left on for too long and becomes difficult to remove and create a nice shine with, simply re-wet the area with the applicator pad and instantly buff to a shine with a microfibre cloth. Do not allow the coating to cure with streaks and a rainbow.
Once all areas have been coated, ensure the vehicle is not washed for 7 days. Now sit back, admire and enjoy the unparalleled 3 year protection and slick gloss that CeramiXPPF provides your vehicle.
Always store in a cool, well-ventilated area keeping containers tightly closed.
After treatment ensure the vehicle is not washed for 7 days. You should only use pH Neutral cleaners on the coated surface, such as ProSno Snow Foam & HydroLux / PearlLux pH Neutral Shampoo.
For contact washes always use the 2-bucket wash method, using the AquaCleanse wash mitt and AquaLux drying towel and ensuring no scratches occur with the Dual Guard Grit Guard package.
A: At Car Dynamics we have formulated our ceramic and graphene coatings with the highest quality ingredients, ensuring long-lasting protection and ease of application. Our ceramic and graphene coatings are manufactured in the UK with the emphasis on quality and affordability for our customers. Our comprehensive kits include the highest grade of applicators and cloths making it simple for the seasoned professional as well as the keen DIYer.
A: No. Ceramic coatings are not fillers. They may slightly mask micro-marring due to added gloss, but we recommend machine polishing the paint first for the best final finish.
A: At Car Dynamics, we’ve committed to making professional-grade detailing accessible to all by keeping our prices affordable, while not compromising on quality.
Unlike our competitors, we've avoided costly marketing campaigns and retailers, and have instead focused selling directly to you, the consumers. By eliminating middle men like retailers and marketing agencies who each take a cut, we've instead passed on these savings directly to you, our valued customers. This has allowed us to offer superior products at lower costs.
We truly believe that the community of customers we have built is our key to success. Hence our high-performance detailing products are at a fraction of the price of comparable brands and our valued community of customers continue to come back and grow via word of mouth.
A: Yes, absolutely. We partner with several professional detailing companies across the world that use our products. If you would like to discuss special pricing for a bulk order please contact us at info@cardynamics.co.uk.
A: 9H refers to the hardness rating on the pencil scale, it’s the highest measurable level for scratch resistance in coatings. It helps resist light swirls, marring, and chemical damage.
We accept the following paying methods
