Automotive smoke leak detector with built in air pump
The FOXWELL SD201 is an automotive EVAP smoke leak detector designed to identify leaks in various vehicle systems, including fuel pipes, vacuum lines, intake systems, exhaust systems and more. It features a built in air pump, overheat protection, anti frost protection and operates using a 12V vehicle battery. It offers better value with low power consumption, minimal oil usage and a slower temperature rise during operation.
Common Leak Symptoms
If you are experiencing any of the following issues, it may indicate a system leak in your vehicle. The SD201 is designed to help you quickly locate and diagnose the source of the problem.
Reduced power or underpower issues
Unusual smells from the vehicle
Strange fluid spots or visible marks
Engine running too hot
Dashboard warning lights appearing
Frequent oil or coolant refilling
Built In Air Pump
Equipped with a newly upgraded built in air pump, the SD201 removes the need for an external air pump. This all in one design offers greater convenience and mobility, allowing you to perform tests anytime and anywhere. Operating at an output pressure range of 0.8 to 1.2 bar, it accurately simulates real time vehicle conditions.
Pipeline System Coverage
The SD201 is engineered to diagnose leaks in virtually all major automotive pipeline systems, helping ensure no hidden leak goes undetected.
EVAP system
Intake system
Engine system
Turbo system
Fuel tank system
Crankcase system
Exhaust system
EGR system
Car sealing tests
Smoke Mode
Smoke Mode uses a 12V vehicle battery to generate visible smoke, allowing you to quickly and accurately locate leaks. This makes it suitable for both professional diagnostics and DIY repairs.
Variable Frequency Operation
The SD201 adopts advanced variable frequency operation technology. With a 10 minute work cycle, testing can be restarted easily with a single button for continued diagnostics without interruptions.
Important Note
Always follow the user manual and vehicle safety guidance when carrying out smoke leak testing.
Choosing a selection results in a full page refresh.
Opens in a new window.
PayPal Pay Later Messaging
Step 1: Choose message placement
Click the button below and then hover over your page to select a placement.
Step 2: Paste and save
You have copied the placement for the Product Page.
Go back to the App Embeds section, and in the Paypal Advanced Settings, paste the copied value into the
Product Page field and click the 'Save' button in the top right corner.
