Car Dynamics
NanoCoat is the ultimate easy and safe to use nano-spray-sealant for all exterior surfaces such as paintwork, glass, plastics and alloys.
Whether it’s used as a top up to an existing wax or sealant, or applied as a new layer, NanoCoat provides a sheeting glossy hydrophobic protection that lasts up to 2-3 months.
Experience the satisfaction of slick, mirror-like surfaces and relentless water repellency all in a matter of minutes. With just a simple spray and rinse, NanoCoat delivers instant powerful water-beading performance, making every wash easier and your vehicle looking freshly detailed every time.
⚠️ Note: NanoCoat is not suitable for wrapped or matt surfaces.
A: Both solutions have been developed for the quick application of a glossy hydrophobic layer. The difference is that CarnaubaMist is a wax based formula that is designed to provide 6-8 weeks of protection while NanoCoat is a nano sealant that can provide up to 3 months of protection.
Unlike CarnaubaMist, NanoCoat can be applied to all exterior surfaces including windscreens, whereas CarnaubaMist cannot.
Lastly CarnaubaMist can be used on Matt and wrapped finishes where as NanoCoat is not suitable for these surfaces.
A: No. NanoCoat is a spray sealant, not a ceramic coating. However, it shares similar benefits like hydrophobicity, gloss enhancement and surface slickness, without the complex application or curing time.
A: NanoCoat is a spray sealant, not a ceramic coating while AquaVeil is a ceramic coating. However, both share similar benefits like hydrophobicity, gloss enhancement and surface slickness, without the complex application or curing time.
The main difference between the two is that NanoCoat can be applied to all surfaces such as paintwork, glass, alloys and plastics making it a comprehensive solution for hydrophobicity on your vehicle.
AquaVeil on the other hand is specifically for paintwork application and consequently has a stronger chemical bond to the surface with more resistance to chemicals and UV. This also gives it a slightly harder glass-like finish.
A: Allow at least 12–24 hours before washing to let the sealant fully bond. Avoid using strong detergents immediately after application.
A: Yes, it works excellently as a top-up layer, reviving gloss and slickness on previously waxed or ceramic-coated vehicles. It's also perfect as a maintenance sealant between major detailing steps.
We accept the following paying methods
