UltraPrism
All In One Polish
Load video:

UltraPrism Overview

UltraPrism is the all in one polish that allows you to polish, glaze and wax your paintwork with one easy application.

It’s an easy on, easy off, low dusting solution that finishes paintwork with polymers and Carnauba Wax providing both protection and a deep wet glossy look shine.

UltraPrism can also be used to remove small scuffs and scratches on new or old paintwork.

UltraPrism saves time without sacrificing results, making it perfect for enthusiasts and professionals alike. Its rich formula enhances colour depth and clarity, bringing dull paint back to life in minutes.

Whether you're prepping for a show or just want that jaw-dropping finish on your daily driver, UltraPrism delivers a silky-smooth surface with long-lasting protection.

One product, one step, total transformation, UltraPrism is the polish your detailing kit has been waiting for.

Tyre Dressing Application 1 Tyre Dressing Application 2 Tyre Dressing Application 1

How To Use

  1. Shake well before use.
  2. Ensure paintwork has been washed and de-contaminated thoroughly and is dry.
  3. Ensure surfaces are not warm or in direct sunlight.
  4. Using a microfiber or polish applicator such as DiscOPad, apply in circular motions to a small area with light pressure one panel at a time. Do not allow the polish to dry on the surface.
  5. Increase pressure over any marks, scratches, or dull patches.
  6. Allow to cure for a couple of minutes before removing excess with a microfiber cloth such as Ultra Buff 400.

⚠️ Note: Do not use on wrapped or matt surfaces or apply to unpainted rubber or plastic trim.

FAQ

Q: Can I use a machine polisher instead of a DiscOPad?

A: Yes. You can use either a DiscOPad microfibre applicator or a machine polisher with UltraPrism. Typically those that are short on time will use a DiscOPad while those that want more depth will use a machine polisher. If you are using a machine polisher a medium soft pad will be sufficient.

Q: How long does the wax protection from UltraPrism last?

A: You can typically expect up to 4-8 weeks of wax protection from UltraPrism. You can then top up your protection

Q: Is UltraPrism suitable for paintwork correction prior to applying a ceramic coating like CeramiX5?

A: No. UltraPrism is an all in one polish that not only contains advanced abrasives but also glazing oils and carnauba wax. Ceramic coating products such as CeramiX5 or CeramiX3 need to chemically bond to paintwork and consequently there should be no protective layers on the paintwork such as wax that blocks this bonding. For paint correction before application of any ceramic coating, we recommend a medium cut polishing compound such as 3M Perfect It Ultrafine SE Polish 50383.

Shipping Icon
Fast International & Free UK Shipping*
*Terms & Conditions Apply
UK Flag Icon
Made in the UK
Returns Icon
Easy & Free Returns*
*Terms & Conditions Apply
Support Icon
24/7 Support