CeramiXWheel Overview
CeramiXWheel is the advanced 3-Year ceramic coating solution for chrome, alloy and steel wheels. Designed specifically for being resistant to high temperatures, CeramiXWheel not only provides exceptional protection for wheels but also dramatically enhances their appearance.
CeramiXWheel utilises cutting-edge ceramic technology that creates a durable, long-lasting barrier against contaminants, water, and brake dust. This advanced formula forms a strong layer that bonds with the surface of your wheels, creating a protective layer that repels dirt and dust while providing an incredible shine. Its resistance to high temperatures also enables it to withstand exposure to harsh chemicals, making it ideal for use on high-performance vehicles.
As well as providing unparalleled protection, CeramiXWheel is also designed to maintain the immaculate condition of wheels for up to three years when correctly maintained.
Designed for easy application, CeramiXWheel is the ideal solution for the weekend DIYer as well as the seasoned professional detailer.
With its long-lasting properties, CeramiXWheel enables you to enjoy the benefits of a well protected finish for years to come without the headache of frequent reapplications.
Kit Includes:
1 × 30ml CeramiXWheel
3-Year ceramic coating solution for chrome alloy and steel wheels.
1 × 100ml CoatPrep
Decontaminate solution that ensures any remaining residues are removed.
2 × DiscOPad ( Wheel Coat Applicators )
High-quality microfibre applicators designed for precise even application of CeramiXWheel Coating.
2 × UltraBuff 300 (40x40cm Microfibre Cloths 300gsm)
Ultra-soft lint-free cloths for buffing and residue removal without scratching.
1 × CeramiXWheel Instruction Manual
Comprehensive step-by-step guide to ensure correct application and optimal results from start to finish.
1 × Pair of Nitrile Gloves
Protects your hands during the coating process.
1 × 1ml Precision Pipette Dropper
Allows for controlled and accurate dispensing of coating solution.
How To Use
Before You Start Ensure:
The application procedure is conducted in a well-ventilated area and the provided nitrile gloves are always used when applying the coating.
Prepare the Surface:
For effective adhesion and longevity, surface preparation prior to coating is paramount. Without correct and proper preparation the coating will have a short-lived final finish.
CeramiXWheel works by cross-linking to the surface that it’s applied to, hence surface cleaning is an essential part of the process to avoid contamination between the coating and the surface to be protected.
Weather
CeramiXWheel must be applied in a clean, dry environment with no rain forecast for a minimum 4-hour period if application is outside. If strong winds are present, coating should not take place due to the coating flashing off too quickly.
Temperature
Application should not occur in direct sunlight or during the hotter parts of the day. The coatings should be applied in an ambient temperature above 5°C and no higher than 35°C. This temperature range also applies to the surface temperature of the substrate. Additionally the temperature must stay within these parameters for a minimum of 12 hours after application.
Clean & Decontaminate
Ensure the wheel surface has been thoroughly washed and cleaned. Typically where required this would include a Pre-Wash with IronXtract, followed by ProSno or ProAlpine snow foam. The vehicle should also have been shampooed with either HydroLux or PearlLux shampoo. Use AlloyXtreme wheel cleaner to finally remove any bonded contaminants the washing process can’t remove. For heavily contaminated surfaces a full polish/detail may also be required to get the finish to an acceptable standard prior to coating.
Once clean, the vehicle surface needs to be de-contaminated using the CoatPrep solution provided in the kit. This ensures any remaining residues from waxes, silicones and other contamination are removed.
Applying the Cerramic Coating
Begin with one wheel and coat one wheel at a time, ensuring that the coating is gently worked horizontally, then vertically, for an even spread of the coating. This method is known as cross-hatching as shown in the photo.
The area should look wet and have a rainbow appearance after approximately 1–3 minutes.
Gentle Buffing
After the initial buff you may see a slight haze / smear effect under an inspection light. Grab a second microfibre cloth and very gently wipe along the surface again. Ensure the buffing process is light and only excess residue is being removed.
Continue this until a uniform streak free appearance is achieved and you have the perfect finish.
Repeat Process in a New Area
Once the buffing process is complete, repeat the aforementioned steps by first selecting a new wheel to be coated. It is important to note that after the first application you may only need 3–5 drops as the ceramic coating applicator becomes saturated.
To make the process more efficient, having multiple people is ideal. This way as one person applies the coating using the cross-hatching method, the other person can follow shortly after in synchronisation with the buffing and levelling.
Please note in some cases if the product has been left on for too long and becomes difficult to remove and create a nice shine with, simply re-wet the area with the applicator pad and instantly buff to a shine with a microfibre cloth. Do not allow the coating to cure with streaks and a rainbow.
Once all the wheels have been coated, ensure the wheels are not washed for 7 days. Now sit back, admire and enjoy the unparalleled protection that CeramiXWheel provides your wheels.
Product Maintenance & Aftercare
Always store in a cool, well-ventilated area keeping containers tightly closed.
After treatment ensure the wheels are not washed for 7 days. You should only use pH Neutral cleaners on the coated surface, such as ProSno Snow Foam, HydroLux / PearlLux pH Neutral Shampoo & AlloyXtreme.
For contact washes always use the 2-bucket wash method, using the AquaCleanse wash mitt and AquaLux drying towel and ensuring no scratches occur with the Dual Guard Grit Guard package.
Suggested Preparation & Aftercare Products
Works With:
- IronXtract Brake Dust & Contaminant Cleaner
- ProAlpine PH Snow Foam
- AlloyXtreme Wheel Cleaner
- CoatPrep Ceramic Coating Surface Cleaner
Suggested Aftercare Products:
- ProSno PH Neutral Snow Foam
- HydroLux PH Neutral Shampoo
- PearlLux PH Neutral Shampoo
- AlloyXtreme Wheel Cleaner
- AquaCleanse Microfibre Wash Mitt
- AquaLux Microfibre Drying Towel
- DualGuard Dual Grit Guard Protection
Location
England, UK
We accept the following paying methods
- Choosing a selection results in a full page refresh.
- Opens in a new window.