Car Dynamics
Formulated for factory finish alloys only, AlloyPristine is an advanced wheel cleaner gel that clings to wheels enabling longer dwelling times and better cleaning performance.
With its thickened alkaline formulation, it emulsifies and removes road salts, grime and dirt with ease.
If you're looking for a product that works harder so you don't have to, AlloyPristine is your go to solution. Its clinging gel consistency ensures every inch gets the attention it deserves, leaving your wheels looking like they just rolled off the productionline.
AlloyPristine is perfect for enthusiasts who demand showroom results with minimal effort.
⚠️ Note: This product is suitable for factory finish alloy wheels only. Use on any other surface is done at the user’s risk and compatibility must be tested on a small inconspicuous area prior to extensive use, especially on poor quality or scuffed alloy wheels.
A: No there is no acid in Car Dynamics' AlloyPristine wheel cleaner gel. The solution is alkaline based making it safe for factory finish wheels.
A: Allow Alloy Pristine to dwell for 2-3 minutes and no longer than 3 minutes. Ensure you rinse off straight away and don't allow it to dry on the surface.
A: Possibly if used regularly on a ceramic coated wheel. AlloyPristine is made of an alkaline formulation which with prolonged use on a ceramic coating can potentially degrade its hydrophobic layer over time. For ceramic coated wheels we recommend IronXtract which is our pH balanced wheel cleaning solution.
A: If AlloyPristine is left to dry on your wheels, or is left to dwell for more than 3 minutes then yes there is a risk damage can be caused. This is because the longer the chemicals are left on the wheel surface the more concentrated they become. Hence we recommend using AlloyPristine only on factory finished alloys, on a cool surface and with a maximum dwell time of 3 minutes.
A: No, AlloyPristine comes in a ready to use spray bottle.
We accept the following paying methods
