UltraPrism

All In One Polish

No product

FINAL
SALE

Get 30% OFF

UltraPrism Overview

UltraPrism is the all in one polish that allows you to polish, glaze and wax your paintwork with one easy application.

It’s an easy on, easy off, low dusting solution that finishes paintwork with polymers and Carnauba Wax providing both protection and a deep wet glossy look shine.

UltraPrism can also be used to remove small scuffs and scratches on new or old paintwork.

How To Use

1: Shake well before use.

2: Ensure paintwork has been washed and de-contaminated thoroughly is dry.

3: Ensure surfaces are not warm or in direct sunlight.

4: Using a microfiber or polish applicator, apply in circular motions to a small area with light pressure one panel at a time. Do not allow the polish to dry on the surface.

5: Increase pressure over any marks, scratches, or dull patches.

6: Allow to cure for a couple of minutes before removing excess with a microfiber cloth.

⚠️ Note: Do not use on wrapped or matt surfaces or apply to unpainted rubber or plastic trim.

FAQ

Q: Does UltraPrism polish contain wax? A: Yes, UltraPrism All In One Polish does contain a protective Carnauba wax. If you would like to extend and prolong that protection, apply Car Dynamics' CarnaubaMist, AquaVeil or NanoCoat afterwards.

Q: Can I use UltraPrism for paint correction for the preparation of a ceramic coating application? A: No. UltraPrism is an all-in-one polish and intended to clean, enhance and protect paintwork in a single application. Hence it not only contains advanced abrasives, but is also made up of a certain proportion of polymers and carnauba wax. As the wax physically bonds by clinging to the top surface of the vehicle body as a separate, smooth layer, it consequently blocks the chemical bonding of any ceramic layer. Therefore prior to any application of ceramic coating, we recommend polishing compounds that do not contain waxes or glazes,

Q: Can I apply UltraPrism Polish to unpainted plastic bumpers and trim? A: UltraPrism All In One Polish is only suitable for painted bodywork. If any residue from the polish comes into contact with unpainted surfaces, use Car Dynamics' HighGlass with a Hi-Tech Microfibre to remove this.

Q: Can you apply UltraPrism polish with a machine polisher? A: UltraPrism Polish has been developed with fine diminishing abrasives which are designed to be extremely easy to break down by hand. Unlike traditional polishes or compounds that require a machine polisher to fully work through the abrasives, UltraPrism allows this process to be completed by hand quickly and simply using a Microfibre Applicator, That said, for those that want the advantage of a quick and easy professional finish without the elbow grease, using a Dual Action polisher is perfectly acceptable.

Q: Will UltraPrism make my vehicle paint work shiny and glossy ? A: Yes. As well as removing swirl marks and scratches, UltraPrism adds a layer of wax protection. This wax bonds to the vehicle paintwork to produce a glossier and smoother looking surface.