ProSno

PH Neutral Snow Foam

REMUS Universal Chrome Car Exhaust Tip – 76-101mm Performance Muffler Tailpipe

£44.99

FINAL
SALE

Get 30% OFF

ProSno Overview

ProSno is a Snow Foam that is an essential part of the pre-wash process, enabling heavy, gritty particulate grime to be removed without contacting the vehicle. Applied using a pressure washer or foam gun, ProSno encapsulates the entire vehicle exterior with a glorious foam blanket, working its way into panel gaps and shuts to ensure no surfaces are missed.

ProSno clings to paintwork, safely trapping particles while gently loosening and lifting dirt and contaminants. It consequently reduces the risk of scratches and swirl marks caused by abrasion from wash mitts or sponges when agitating heavy contamination on paintwork. With its pH neutral formulation, ProSno will not affect or remove any existing layers of polish or wax.

Available in both a 1 litre bottle or a 5 litres jerry can.

How To Use

1: Complete the preliminary prewash process with either CitraCleanse, NeutralXTFR or PowerXTFR based on your requirements.

2: Ensure both bodywork and wheels are cool to the touch and out of direct sunlight.

3: Dilute ProSno in a snow foam bottle in accordance with the density of foam desired. For an extra thick blanket of foam dilute 1 part ProSno to 5 parts water. For a thick blanket of foam dilute 1 part ProSno to 10 parts water. For a thinner blanket of foam dilute 1 part ProSno to 20 parts water.

4: Using a snow foam lance such as FoamXCannon, apply ProSno onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.

5: Leave ProSno to dwell for approximately 5-8 minutes, ensuring it doesn’t dry on the surface.

6: Using a pressure washer rinse the foam thoroughly from the bottom up.

⚠️ Please note ProSno is not suitable for use on soft top convertibles.

FAQ

Q: Is ProSno PH Neutral? A; Yes, it is PH neutral and will therefore not remove any wax coatings.

Q: Does ProSno have to be used with a pressure washer? Can I not just use it from a bucket? A: ProSno has been carefully designed and formulated for foam gun / foam lance usage that's attached to a pressure washer. For best results we recommend our foam lance FoamXCannon. We do not recommend using this product in a bucket.

Q: What exactly is ProSno and why do I need it? A: ProSno is a snow foam that is applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosens dirt and heavy soiling prior to shampooing. Its purpose is to reduce the risk of scratches and swirl marks caused by contact washing i.e. if a wash mitt is moving over heavy contamination.

Q: Can I apply ProSno from the bottom upwards? The directions state to start from the bottom? A: No. When applying ProSno you start from the bottom of the vehicle but it should be applied in a side to side motion to ensure even coverage, i.e. not spraying up and down. If you apply ProSno from the bottom upwards in an up and down motion you risk pushing soiling from more contaminated areas higher up to cleaner areas as the lower areas of a vehicle are typically the most contaminated. Therefore we strongly recommend to use ProSno in side to side motion, starting at the bottom where it will cling to dirt and contaminants and loosen them on to the floor.

Q: What's the difference between ProSno and ProAlpine as both are advertised as Snow Foams? A: That's correct both ProSno and ProAlpine are snow foams in the Car Dynamics range. The difference is that ProSno is specifically designed with a PH neutral formula while ProAlpine has an alkali formula. This makes ProSno suitable for vehicles with any previously-applied ceramic coating, wax or sealant layers. ProSno will not degrade any protection layers due to its non-stripping characteristics and is consequently ideal for regular maintenance washes.

Q: Can I use ProSno on a car wrap or matt / satin paint? A: Yes.

Q: Do I have to use preliminary prewash products such as CitraCleanse, NeutralXTFR or PowerXTFR with ProSno? A: It depends but you don't have to. The preliminary prewash process is aimed at aiding as much contaminant and dirt removal prior to any cleaning of the vehicle that's done by hand. So if your vehicle is heavily contaminated in the lower areas of the vehicle such as the wheel arches, side skirts, bottom of bumpers etc. we recommend either NeutralXTFR or PowerXTFR to be used in conjunction with ProSno. For areas such as the front where there may be heavy fly splatter, we recommend the usage of CitraCleanse. By using these preliminary prewash products and then applying ProSno across the entire vehicle, you maximise the removal of dirt and contaminants prior to any hand contact cleaning.