NanoCoat

Nano Sealant

Mercedes-Benz AMG Carbon Fibre & Leather Flat Bottom Steering Wheel

£779.99

FINAL
SALE

Get 30% OFF

NanoCoat Overview

NanoCoat is the ultimate easy and safe to use nano-spray-sealant for all exterior surfaces such as paintwork, glass, plastics and alloys.

Whether it’s used as a top up to an existing wax or sealant, or applied as a new layer, NanoCoat provides a sheeting glossy hydrophobic protection that lasts up to 2-3 months.

How To Use

For application on dry surfaces:

1: Ensure the areas to be sprayed are not in direct sunlight and are cool to the touch.

2: Spray directly onto the surface and spread with a soft microfibre cloth and buff as required.

For application on wet surface:

1: Spray NanoCoat onto the wet surface and pressure wash off immediately.

2: Dry the vehicle using a microfibre drying towel such as AquaLux or car dryer.

⚠️ Note: NanoCoat is not suitable for wrapped or matt surfaces.

FAQ

Q: Is ProSno PH Neutral? A; Yes, it is PH neutral and will therefore not remove any wax coatings.

Q: Does ProSno have to be used with a pressure washer? Can I not just use it from a bucket? A: ProSno has been carefully designed and formulated for foam gun / foam lance usage that's attached to a pressure washer. For best results we recommend our foam lance FoamXCannon. We do not recommend using this product in a bucket.

Q: What exactly is ProSno and why do I need it? A: ProSno is a snow foam that is applied using a pressure washer or foam gun. It covers the vehicle in a rich blanket of foam that clings to paintwork to gently loosens dirt and heavy soiling prior to shampooing. Its purpose is to reduce the risk of scratches and swirl marks caused by contact washing i.e. if a wash mitt is moving over heavy contamination.

Q: Can I apply ProSno from the bottom upwards? The directions state to start from the bottom? A: No. When applying ProSno you start from the bottom of the vehicle but it should be applied in a side to side motion to ensure even coverage, i.e. not spraying up and down. If you apply ProSno from the bottom upwards in an up and down motion you risk pushing soiling from more contaminated areas higher up to cleaner areas as the lower areas of a vehicle are typically the most contaminated. Therefore we strongly recommend to use ProSno in side to side motion, starting at the bottom where it will cling to dirt and contaminants and loosen them on to the floor.

Q: What's the difference between ProSno and ProAlpine as both are advertised as Snow Foams? A: That's correct both ProSno and ProAlpine are snow foams in the Car Dynamics range. The difference is that ProSno is specifically designed with a PH neutral formula while ProAlpine has an alkali formula. This makes ProSno suitable for vehicles with any previously-applied ceramic coating, wax or sealant layers. ProSno will not degrade any protection layers due to its non-stripping characteristics and is consequently ideal for regular maintenance washes.

Q: Can I use ProSno on a car wrap or matt / satin paint? A: Yes.

Q: Do I have to use preliminary prewash products such as CitraCleanse, NeutralXTFR or PowerXTFR with ProSno? A: It depends but you don't have to. The preliminary prewash process is aimed at aiding as much contaminant and dirt removal prior to any cleaning of the vehicle that's done by hand. So if your vehicle is heavily contaminated in the lower areas of the vehicle such as the wheel arches, side skirts, bottom of bumpers etc. we recommend either NeutralXTFR or PowerXTFR to be used in conjunction with ProSno. For areas such as the front where there may be heavy fly splatter, we recommend the usage of CitraCleanse. By using these preliminary prewash products and then applying ProSno across the entire vehicle, you maximise the removal of dirt and contaminants prior to any hand contact cleaning.