FoamXCannon

Snow Foam Lance

No product

FINAL
SALE

Get 30% OFF

FoamXCannon
Overview

Maximum foam with minimal effort:

The FoamXCannon Snow Foam Lance delivers 1L of thick, even foam coverage with just a twist and spray. It’s your essential weapon against dirt for an effective prewash and sealant process.

Working in conjunction with either ProSno or ProAlpine snow foam, FoamXCannon quickly generates thick and intense coats of clingy foam, maximising the surface area and dirt your snow foam clings to.

Built with four adjustable spray modes, FoamXCannon ensures you get comprehensive coverage of your vehicle while easily following its contour lines to cover small crevices and hard to reach areas.

As well as enabling a fantastic prewash, FoamXCannon can also be used with NanoBead after a shampoo and wash to provide an effective invisible protective polymer coating. In this instance, FoamXCannon is quintessential in spreading an even hydrophobic layer onto your paintwork, causing water to bead and roll off, dramatically reduce your drying time.

Supplied with both a ¼” quick-connect and Kärcher K Series adaptor (K2-K7 range), FoamXCannon is compatible with a wide range of pressure washers. Using the custom mixing dial to easily control your dilution, FoamXCannon is the simple to use yet effective foam lance that’s ideal for both the DIYer and the seasoned detailing pro.

How To Use

To set up the lance, first attach the pick-up tube to the Nickel-plated copper suction nozzle on the underside of the foam lance head.

Select the correct connector for your pressure washer (the kit includes both a ¼” and Kärcher K-series connector). Next, attach the black end of the connector to the handgun of your pressure washer. Pull back the spring-loaded brass collar on the connector and attach it to the silver nozzle on the Foam Lance head.

1: Dilute the product in the FoamXCannon 1L reservoir bottle at the rate outlined in the product’s instructions.

2: Screw the FoamXCannon gun head onto the reservoir bottle and attach to your pressure washer gun.

3: Begin by allowing the product to feed through the lance by aiming your pressure washer at the floor and pulling the trigger.

4: Turn and adjust the nozzle to choose which of the 4 spray modes you require. Additionally turn the mixing dial to adjust the density of foam / product.

5: Begin spraying on your car in accordance with the product instructions.

6: Once complete, rinse the reservoir bottle with clean water to remove any residue of the last used product.

7: After use, ensure you flush through the FoamXCannon with clean water.

FAQ

Q: Does UltraPrism polish contain wax? A: Yes, UltraPrism All In One Polish does contain a protective Carnauba wax. If you would like to extend and prolong that protection, apply Car Dynamics' CarnaubaMist, AquaVeil or NanoCoat afterwards.

Q: Can I use UltraPrism for paint correction for the preparation of a ceramic coating application? A: No. UltraPrism is an all-in-one polish and intended to clean, enhance and protect paintwork in a single application. Hence it not only contains advanced abrasives, but is also made up of a certain proportion of polymers and carnauba wax. As the wax physically bonds by clinging to the top surface of the vehicle body as a separate, smooth layer, it consequently blocks the chemical bonding of any ceramic layer. Therefore prior to any application of ceramic coating, we recommend polishing compounds that do not contain waxes or glazes,

Q: Can I apply UltraPrism Polish to unpainted plastic bumpers and trim? A: UltraPrism All In One Polish is only suitable for painted bodywork. If any residue from the polish comes into contact with unpainted surfaces, use Car Dynamics' HighGlass with a Hi-Tech Microfibre to remove this.

Q: Can you apply UltraPrism polish with a machine polisher? A: UltraPrism Polish has been developed with fine diminishing abrasives which are designed to be extremely easy to break down by hand. Unlike traditional polishes or compounds that require a machine polisher to fully work through the abrasives, UltraPrism allows this process to be completed by hand quickly and simply using a Microfibre Applicator, That said, for those that want the advantage of a quick and easy professional finish without the elbow grease, using a Dual Action polisher is perfectly acceptable.

Q: Will UltraPrism make my vehicle paint work shiny and glossy ? A: Yes. As well as removing swirl marks and scratches, UltraPrism adds a layer of wax protection. This wax bonds to the vehicle paintwork to produce a glossier and smoother looking surface.